PDA

View Full Version : Customizing the mixer



JmJ
02-06-2009, 03:29 PM
I 'd like to be able to open a mixer , hide the faders and show one or more channel-parts (only input- metering or…. aux AND inserts for ex (1) .
It would also be nice if one could -resize the channel-width to ones liking (2) .
The ability to determine on which screen plug-ins should open(3) would be the cherry on top (starting to sound like Jules Verne:098:)

That way I could for ex. have :
-16 input-meters directly above my 16 hardware channel-preamps and seize the channels as if screen one is part of the hardware-setup(2)
-have my standard playback mixer with all aux-sends shown on screen two and have the channels sized so I can see as many channels as "I" like to see.
- have all plug-ins always opening on screen three (and not behind a mixer..(3))

While I'm at it:
If one could also resize the height of a mixer-part…the possibilities would be staggering. Imagine from top to bottom a 3/4-scale playback metering, 4 or 6 inserts, 6 aux, 3/4 fader , channel-name. Now spread that over 3 screens and size to your own liking…still leaves me one screen for plug-ins or analysis-tools.

Just realising...this should belong in the Thinktank…sorry:icon_redface:
Jm

Heuristic
08-26-2009, 10:18 AM
If one could also resize the height of a mixer-part…the possibilities would be staggering. Imagine from top to bottom a 3/4-scale playback metering.....
Jm

I'd like this too, DP6 has this functionality...