My wish list

[Animus]

I am going to compile my own feature request and annoyances for Cubendo, which will be ongoing as I think of em.

1) All faders and sends should go to 12db in the mixer! Only having 6 db of gain is a pain in the ass I have found in a lot of circumstances.

2) Can we get more than 32 outputs per vsti? It's very limiting when using things like VE Pro which can have more outputs. I'd like to be able to load up two instance of Kontakt in VE Pro and have 64 discrete outputs into Nuendo.

3) Can we activate and deactivate multiple selected outputs in a vsti's output configuration? It's a pain having to (de)activate one by one.

[paulwr]

Maybe it's because I haven't upgraded the main DAW to an i7 yet, but..... are guys out there really getting flawless 64 channels of audio out of a single machine and into a slave without a hitch with VE Pro over LAN? I was getting occasional gliches with around 10-12 stereo busses. But I have a Q6600 at the DAW and even slower on the slaves.... so maybe not an issue for some.

Offhand, I'd like to see C5, after you adjust a keyedit screen, when you go out a later come back into it, have the visual adjustments be like you set them (height and scroll position AND song position). C3 did that. I'm loosing all my settings every time I go back in. Slows things down. I don't see a preferences setting that would achieve it.... hope I'm just missing it and someone can set me straight.

-Paul

[Daryl]

I am going to compile my own feature request and annoyances for Cubendo, which will be ongoing as I think of em.

1) All faders and sends should go to 12db in the mixer! Only having 6 db of gain is a pain in the ass I have found in a lot of circumstances.
Can't you use a 6db gain at the top of the channel and move the default position of your faders down to -6db?



2) Can we get more than 32 outputs per vsti? It's very limiting when using things like VE Pro which can have more outputs. I'd like to be able to load up two instance of Kontakt in VE Pro and have 64 discrete outputs into Nuendo.
Can't you already do this? I know I am...!



3) Can we activate and deactivate multiple selected outputs in a vsti's output configuration? It's a pain having to (de)activate one by one.

A definite +1, particularly as it is now possible to have many more Outputs.

D

[Audiocave]

1) All faders and sends should go to 12db in the mixer! Only having 6 db of gain is a pain in the ass I have found in a lot of circumstances.

There's plenty of gain opportunities available there in the channel strip (any plugin slot) especially when you consider that you also have post fader slots where you can add even more gain. Not quite getting that one.

[Animus]

There's plenty of gain opportunities available there in the channel strip (any plugin slot) especially when you consider that you also have post fader slots where you can add even more gain. Not quite getting that one.


Yeah that's a workaround and more work to add another plugin. Actually I run into it more with sends.

+12db seems pretty standard to me on faders and sends on mixers.

[Animus]

Can't you use a 6db gain at the top of the channel and move the default position of your faders down to -6db?


Can't you already do this? I know I am...!


A definite +1, particularly as it is now possible to have many more Outputs.

D


So you are running more than 32 channels vsti output? How?

[Rhino]

While I personally would rarely need 1 and 2, 3 is a no-brainer and 1 and 2 wouldn't hurt any kangaroos, so yes, I'm all for your suggestions.
Cheers,
Rhino